Product features:

Heat exchanger: Ultra-efficient heat transfer

The high quality Ø7mm copper pipe and louver type hydrophilic aluminum fins are used, and the mechanical expansion tube makes the copper pipe and aluminum sheet closely combined; V-shaped design, increase heat transfer area, improve heat transfer efficiency, reduce unit noise; Water flow countercurrent design, improve coil heat transfer efficiency;

Box: beautiful appearance, solid structure

The frame is made of first-grade galvanized steel plate by mold processing, the bearing parts are designed with reinforcement reinforcement, and all fixed holes are stretched to make the structure solid and not easy to deform; The height is only 205mm, the width is only 460mm, the body is small, and the space is small. The standard return bellows can effectively prevent dust from entering the unit, which is conducive to improving the cleanliness of the air system; The rear return air and the lower return air mode can be freely exchanged; The air outlet, top plate, side plate and bottom plate are covered with planting cotton to prevent condensation caused by cold bridge.

Motor: High efficiency, low power consumption

Adopt permanent magnet brushless DC motor, high efficiency, low noise, can realize stepless speed regulation; The motor fixed bracket adopts the top surface reinforced fixed design, the shaft adopts the double flat design with a large diameter of Ø15, and the motor and fan fixed plate adopts the reinforcement design, which can effectively reduce the vibration of the motor during operation and reduce the noise of the unit.

venting

Exhaust using internal design, remove the rubber cover of the exhaust port, use a flat-head screwdriver to twist the exhaust valve to exhaust, the discharged water directly back to the unit's water tray, prevent the flow to the ceiling of the hidden danger; Water pipe insulation is more convenient.

Note:

1. The test conditions of refrigeration capacity are 27℃DB/19.5℃WB for inlet air, 7℃ for inlet water, and 5℃ for water temperature difference;

2. The test conditions for heating capacity are inlet air 21℃DB, inlet water temperature 60℃, air volume and water volume are the same as when cooling:

3. The noise value is based on the test obtained in the semi-anechoic chamber without filter (executive standard: GB/T19232-2019);

4. The net weight of the unit does not include the weight of the condensate pump.

Optional accessories:

Condensate pump

The condensate pump head is 600mm, even if the installation conditions are harsh, it can ensure that the condensate water is barrier-free discharge; The condensate pump is installed in an integrated detachable design for easy maintenance. At the same time, the condensate pump can also be added according to the onsite installation.

TiO2 cold catalyst filter

Use: can inhibit and remove harmful bacteria in the air; Sterilization rate ≥95%; Safe, non-toxic and efficient; Principle of sterilization: The superoxidation ability of TiO2 destroys the cell membrane and causes the loss of cytoplasm, resulting in the death of bacteria; TiO2, as a catalyst of chemical reaction, reacts in the presence of H2O and O2 to generate free radicals to kill bacteria.

PM2.5 high efficiency filter

Use: Can remove small dust particles in the air; Removal rate ≥99%, haze terminator;

PM2.5 removal principle: Through indoor air circulation, physical interception of small dust in the air, to achieve the purpose of clean air, effectively resist haze weather.

Formaldehyde odor filter

Uses: Can absorb, decompose formaldehyde and other organic molecules in the air; Removal rate ≥90%; Feel at home;

VOC removal principle: Through indoor air circulation, absorption and decomposition of toxic and harmful gases such as formaldehyde released in indoor decoration and home building materials.

Equipped with RS485 communication interface, can be linked with the host, and can access the smart home;

Multiple usage modes to choose from:

Summer:

Indoor unit cooling

Indoor unit dehumidification

Winter:

Indoor unit heating

Indoor unit heating + floor heating

Underfloor heating

Transition season: indoor ventilation

Wind speed adjustment: 30%~100% manual or automatic stepless speed control, optional remote control for gear adjustment wind speed;

One-key shutdown: can be operated on any thermostat with one key to shut down all indoor units and hosts;

Child lock: lockable button to prevent misoperation;

Power memory: can be set in the thermostat selection, when the power memory is selected, it can restore the state before the power failure;

Going out mode: When going out for a short time, after enabling the going out mode, the thermostat can automatically enter the energy-saving mode, the fan runs at a low speed, and the temperature control is automatically adjusted to 26 ° C (cooling mode) or 18 ° C (heating or floor heating mode);